|
Overview SICOM6496 is a modular layer 3 managed industrial Ethernet switch with 48 10/100/1000Base-T(X) ports or 48 Gigabit SFP slots specially designed for core backbone network. It supports layer 3 data full wire-speed forwarding and full duplex or half duplex flow control. And SICOM6496 also supports DT-Ring protocols and the recovery time is less than 50ms.
Key Features 1. Layer 3 Full Gigabit Backbone Solution 2. Modular design, supports maximum 48 Gigabit ports or 96 10/100Base-TX ports + 8 Gigabit SFP slots 3. RIP, OSPF, BGP layer 3 routing protocols 4. DT-Ring protocols, MSTP and VRRP 5. Patented heat dissipation technology
Features & Benefits 1. Redundancy Technology: supports DT-Ring protocols (recovery time<50ms), MSTP and VRRP 2. Multicast Protocol: supports IGMP, IGMP Snooping, PIM-SM, PIM-DM, DVMRP 3. Routing Protocol: supports RIPv1/v2, OSPFv2, BGPv4 and static routing protocol 4. Network Partition: supports VLAN, GVRP 5. Service Quality: supports QoS 6. Bandwidth Management: supports port trunking, port speed limit, broadcast storm control 7. Network Management and Monitoring: supports CLI, Telnet, WEB management methods, Kyvision centralized management, SNMPv1/v2, RMON, LLDP, SNTP, DHCP 8. Network Security: supports ACL 9. Device Management: supports FTP/TFTP upgrade, also supports Syslog upload and download 10. Device Maintenance: supports port mirroring 11. Alarm Output: supports port and ring alarms
Standard IEEE 802.3i IEEE 802.3u IEEE 802.3ab IEEE802.3ac IEEE 802.3ad IEEE 802.3z IEEE 802.3x IEEE 802.1p IEEE 802.1Q IEEE 802.1s
Protocol DT-Ring, DT-Ring+, DT-VLAN, MSTP, VRRP; IGMP, IGMP Snooping, PIM-SM, PIM-DM, DVMRP; RIPv1/v2, OSPFv2, BGPv4; VLAN, GVRP; Telnet, HTTP, SNMPv1/v2, RMON, LLDP, BootP, SNTP, DHCP server/relay/client; ACL; FTP, TFTP, Syslog; ARP, QoS, LACP
Switch Properties Priority Queues: 8 Number of VLANs: 4K VLAN ID: 1-4094 Number of Multicast Groups: 256 Routing Table: 30K MAC Table: 16K Packet Buffer: 512Mbit Packet Forwarding Rate: 71.4Mpps Switching Delay: <5μs
Interface 2 slots for power modules 2 slots for 3 types of 24-port or 52-port interface modules: 1) Interface module with 4 combo 1000Base SFP slots or 10/100/1000Base-TX ports, and 20 10/100/1000Base-TX ports 2) Interface module with 4 combo 1000Base SFP slots or 10/100/1000Base-TX ports, and 20 1000Base SFP slots 3) Interface module with 4 1000Base SFP slots and 48 10/100Base-TX ports Console Port: RS232 (RJ45 connector) |
|
LED LEDs on Front Panel: Running LED: Run Power LED: PWR1, PWR2 Interface LED: Link/ACT (RJ45 port), Link (Fiber port), ACT (Fiber port)
Transmission Distance Twisted Pair: 100m (Standard CAT5, CAT5e network cable) Multi Mode Fiber: 850nm, 550m (1000M) Single Mode Fiber: 1310nm, 10km/40km (1000M) 1550nm, 60km/80km (1000M)
Power Requirements Power Input: 48VDC (36-72VDC), 220VAC/DC (85-264VAC/120 370VDC) Power Terminal: 3-pin 7.62mm-spacing plug-in terminal block Power Consumption: <150W
Overload Protection: Support Reverse Connection Protection: Support Redundancy Protection: Support
Physical Characteristics Housing: Aluminum, fanless Protection Class: IP30 Dimensions (W×H×D): 482×356×456 mm (18.98×14.02×17.95 in.) Weight: 20kg (44.092 pound) Mounting: Rack mounting
Environmental Limits Operating Temperature: -40 to 65°C (-40 to 149°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing)
MTBF 237,000 hrs
Warranty 5 years
Approvals CE, FCC
Industrial Standard EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS: IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m (cont.), 1000A/m (1s-3s) IEC61000-4-9 (Pulsed magnetic field): 1000A/m IEC61000-4-10 (Damped oscillation): 100A/m IEC61000-4-12 (Oscillatory wave): 2.5kV/CM, 1kV/DM IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)
Machinery: IEC60068-2-6 (Vibration) IEC60068-2-27 (Shock) IEC60068-2-32 (Free Fall)
Industry: IEC61000-6-2 Power: IEC61850-3, IEEE1613 Railway: EN50155, EN50121-4 Traffic Control: NEMA TS-2 |