|
Overview
The SICOM3008J-M12 robust managed industrial Ethernet switch which is specially designed for military usage has 8 10/100Base-T(X) ports with M12 connectors. It meets Chinese military standards GJB150 and GJB151A-97 and Kyvision management software. Its protection class is IP43 and operating temperature is -40 to 85°C.
Features
1. 8 10/100Base-T(X) ports with M12 connectors
2. Supports DT-Ring protocols (recovery time<50ms) and RSTP/STP (IEEE802.1w/d)
3. Flexible network topologies: ring, chain, star and tangent ring topologies
4. Advanced ring topology protocol avoiding broadcast storm
5. Supports IGMP Snooping, port trunking, port mirroring, QoS, VLAN and ACL
6. Supports multiple management functions including CLI, TELNET, WEB, SNMP V1/V2 and OPC
7. Supports network topology auto-generation and centralized network management
8. Safe MAC and port binding function, static FDB supported
9. Bandwidth configuration controls port bandwidth properly
10. Improves network monitoring ability through RMON(group 1, 2, 3 and 9)
11. Broadcast storm control
12. EMC industrial level 4, specially designed for harsh electromagnetic interference environment
13. Abundant power supply options
14. Relay alarm output for the failure of power
15. Unified management software for SICOM series: Kyvision 3.0.
16. Conforms with Chinese national military standards GJB150 and GJB151A-97
17. Operating temperature: -40 to 85°C (-40 to 185°F)
18. Ribbed aluminum case for heat dissipation, fanless design
19. Rack mounted (19 Inch 1U)
20. IP43 protection class
Standard
IEEE 802.3u
IEEE 802.3
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.1d
IEEE 802.1w
IEEE 802.1p
IEEE 802.1q
Store and forward switching mode
Network
Ring, chain,star and tangent ring network topology
Performance
MAC Address Table Size: 8K
Backplane switching capacity: 8.8G
Interface
10/100M Copper Ports: 8 10/100Base-T(X) ports with M12 connectors, full/half duplex, MDI/MDI-X adaptive
CONSOLE Interface: RS232, M12
Cable
Twisted Pair: 0-100m (Standard CAT5 and CAT5e network cable)
|
|
Power Requirements
Power input: 24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC(88-165VDC), 220VDC/AC
Input terminals: M12
Power consumption: <15W
Physical Characteristics
Casing: Ribbed aluminum case (fanless)
Protection class: IP43
Dimensions (WxHxD): 482.6x44x245 mm (19x1.73x9.65 in)
Weight: 3kg (6.614 pound)
Installation: Rack mounting (19 inch 1U)
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals
IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge
IEC61000-4-3 (RS): 10V/M (80-1000MHz)
IEC61000-4-4 (EFT): ±4KV power lead, ±2KV data lead
IEC61000-4-5 (Surge): power lead ±4KV CM/ ±2KV DM, data lead ±2KV
IEC61000-4-6 (CS): 3V (10KHZ-150KHZ), 10V (150KHz-80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s
IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM
IEC61000-4-10 (Damped oscillatory): 30A/m
IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s
FCC CFR47 Part 15/EN55022: Class A&B
Chinese Military Standard GJB151A-97, GJB150 parameters
CE101: 25Hz-10KHz power lead conducted emission
CE102: 10KHz-10MHz power lead conducted emission
CS101: 25Hz-50KHz power lead conducted susceptibility
CS114: 10KHz-400MHz bulk cable injection conducted susceptibility
CS116: 10KHz-100MHz cable and power cable damped sine transient conduction susceptibility
RE101: 25Hz-100kHz magnetic field radiation emission
RE102: 10kHz-18GHz electric field radiation emission
RS101: 25Hz-100kHz magnetic field radiation susceptibility
RS103: 10kHz-40GHz electric field radiation susceptibility
GJB150-11-86: Anti salt fog
GJB150-6-86: Temperature
GJB150-16-86: Viberation
CE, FCC, RoHS, Chinese Military Certification
MTBF
35 years
Warranty
5 Years
Ordering Information
SICOM3008J-8T-M12: 8 x 10/100Base-T(X) ports with M12 connectors
Power supply: 24VDC, 48VDC, 110VDC, 220VDC, 220VAC, single power supply |
