|
Overview
SICOM3005 is a serial server function integrated programmable industrial Ethernet switch. It is developed under Linux platform supporting redevelopment. It supports 4 serial ports, 2 100M copper/fiber ports and 3 10/100Base-T(X) ports. Its fanless ribbed casing design and ability to handle a wide range of temperatures ensure high reliability in extreme industrial environments. Based on Kyvision3.0, CLI, WEB interface, it offers concentrative management. The state-of-the-art OPC software enables the switch's management embedded in various industrial systems.
Features
1. Supports 4 serial ports, 2 100M copper/fiber ports and 3 10/100Base-T(X) RJ45 ports
2. Embedded serial server has own IP and can be managed through TELNET, WEB, serial port
3. Embedded platform, developed under Linux system, supports redevelopment
4. Flexible RS232 and RS485 combination, supports plug and play and easy configuration in the software
5. Serial port protecting circuit, meets the requirements of anti-interference with industrial level 4
6. Supports DT-Ring protocols (Recovery time<50ms), RSTP/STP (IEEE802.1w/d) redundant protocol
7. Advanced ring topology protocol avoiding broadcast storm
8. Supports IGMP Snooping, port trunking, port mirroring, QoS, VLAN and ACL
9. Supports port speed limitation and special broadcast storm control
10. Safe MAC and port binding function, static FDB supported
11. Bandwidth configuration controls port bandwidth properly
12. Improves network monitoring ability through RMON (Group 1, 2, 3 and 9)
13. Supports multiple management functions including CLI, TELNET, WEB, SNMP V1/V2/V3 and OPC
14. EMC industrial level 4, specially designed for harsh electromagnetic interference environment
15. Abundant power supply options, dual redundant DC power inputs
16. Relay alarm output for the loss of power
17. Ribbed alumnium case for heat dissipation, fanless design
18. Operating temperature: -40 to 85°C (-40 to 185°F)
19. DIN-rail and wall mounting installation
20. IP40 protection class
21. Unified network management software for SICOM series: Kyvision3.0
Standard
IEEE802.3
IEEE802.3u
IEEE802.3x
IEEE802.1q
IEEE802.1p
IEEE802.1d
IEEE802.1w
Store and forward switching mode
TCP Server
TCP Client
UDP
Network
Ring, chain, star network topology |
|
Interface
100M Fiber Ports: 2 x 100Base-FX ports, FC/SC/ST
10/100M Copper Ports: 3/4 x 10/100Base-T(X) ports, RJ45 (4, without serial port)
Serial Ports: 4 x RS232/RS485 serial ports, 20-Pin 3.81mm-spacing terminal block
CONSOLE Interface: RS232, RJ45
Alarm Contact: 3-Pin 3.81mm-spacing terminal block, 250VAC/220VDC Max; 2A Max; 60W Max
LED Indicator: RUN1, RUN2, PWR1, PWR2; LINK/ACT, 10M/100M (1-5); ALARM, TX1-TX4, RX1-RX4 (RS232/485)
Performance
Backplane switching capacity: 5.6G
MAC Address Table Size: 8K
Cable
Serial Cable: 15m for RS232, 1200m for RS422/485
Twisted Pair: 0-100m (Standard CAT5 , CAT5e network cable)
Multi Mode Fiber: 1310nm,0-5km(100Mbps)
Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km
Power Requirements
Power input: 12VDC (9V-18VDC), 24VDC (18-36VDC), 48VDC (36-72VDC), dual redundant power inputs
Power terminal: 5-pin 5.08mm-spacing plug-in terminal block
Power consumption: <10W
Physical Characteristics
Casing: Ribbed aluminum case (fanless)
Protection class: IP40
Installation: DIN-Rail or wall mounting
Dimensions (WxHxD): 55.4x139x119.5 mm (2.18x5.47x4.70 in.)
Weight: 0.6kg (1.322 pound)
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals
IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge
IEC61000-4-3 (RS): 10V/M (80-1000MHz)
IEC61000-4-4 (EFT): ±4KV power line, ±2KV data line
IEC61000-4-5 (Surge): power line ±4KV CM/ ±2KV DM, data line ±2KV
IEC61000-4-6 (CS): 3V (10KHZ-150KHZ), 10V (150KHz-80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s
IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM
IEC61000-4-10 (Damped oscillatory): 30A/m
IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s
FCC CFR47 Part 15/EN55022: Class A&B
IEC61000-6-2 (Industrial Standards), IEC61850-3(Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)
CE, FCC, ROHS
MTBF
35 years
Warranty
5 years |
