|
Overview The SICOM3000BA series, intrinsically safe low power consumption Gigabit managed DIN-Rail industrial Ethernet switch, was developed by Kyland for industrial information layers in transport, power and mining applications. It offers three Gigabit fiber/TP ports and six 10/100M TP ports. Its fanless ribbed casing design and ability to handle a wide range of temperatures ensure high reliability in extreme industrial environments. Its full load power consumption is less than 5.6W, and it has passed Mine Safety Certification. Based on Kyvision3.0, CLI, WEB interface, it offers concentrative management. The state-of-the-art OPC software enables the switch's management embedded in various industrial systems.
Features 1) Approved by mining safety certification 2) Low power consumption, less than 5.6W under full load 3) Supports DT-Ring protocols (Recovery time<50ms), RSTP/STP (IEEE802.1w/d) redundancy protocol 4) Flexible network topologies: ring, chain, star and tangent ring 5) Supports 3 Gigabit fiber ports 6) Advanced ring topology protocol avoiding broadcast storm 7) Supports IGMP Snooping, port mirroring, QoS, VLAN 8) Supports multiple management functions including CLI, TELNET, WEB, SNMP V1/V2 and OPC 9) Supports network topology auto-generation and centralized network management 10) Safe MAC and port binding function, static FDB supported 11) Bandwidth configuration controls port bandwidth properly 12) Broadcast storm control 13) EMC industrial level 4, specially designed for harsh electromagnetic interference environment 14) Supports 3.3VDC, 24VDC, 48VDC, dual redundant power inputs 15) Relay alarm output for AC or DC power supply failure 16) Unified management software for SICOM series: Kyvision 3.0. 17) Operating temperature: -40°C to 85°C 18) Ribbed aluminum case for heat dissipation, fanless design 19) IP40 protection 20) DIN-Rail mounting and wall mounting
Standard IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3z IEEE802.3ab IEEE802.1d IEEE802.1w IEEE802.1p IEEE802.1q Store and forward switching mode
Network Ring, chain, star and tangent ring network topology.
Interface Gigabit Ethernet Ports: 3 1000Base SFP slots for 1000Base-SX/LX/LH/ZX, LC or 10/100/1000Base-T(X), RJ45 interface modules 10/100M Copper Ports: 6 10/100Base-T(X) ports, RJ45 Console Interface: RS232, RJ45
Performance MAC Address Table Size: 8K Backplane switching capacity: 7.2G
|
|
Cable Twisted Pair: 0-100m Multi Mode Fiber: 1310nm 0-2km (1000Mbps) Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km
Power Requirements Power Input: 3.3VDC, 24VDC (18-36VDC), 48VDC (36-72VDC), dual redundant power inputs Power terminal: 6-Pin 5.08mm-spacing terminal block (3.3VDC), 3-Pin 3.81mm-spacing terminal block (24VDC, 48VDC) Power Consumption: <5.6W (1000Base-FX)
Physical Characteristics Casing: Ribbed aluminum case (fanless) Protection class: IP40 Dimensions (WxHxD): 75x140x123 mm (2.95x5.51x4.84 in.) (24VDC, 48VDC), 150x61.5x110mm (5.91x2.42x4.33 in)(3.3VDC) Weight: 1.2kg (2.646 pounds) Installation: DIN-Rail or wall mounting
Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge IEC61000-4-3 (RS): 10V/M (80-1000MHz) IEC61000-4-4 (EFT): Power line ±4KV, data line ±2KV IEC61000-4-5 (Surge): Power line ±4KV CM, ±2KV DM, Data line ±2KV IEC61000-4-6 (CS): 3V (10KHz-150KHz), 10V (150KHz-80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM IEC61000-4-10 (Damped oscillatory): 30A/m IEC61000-4-16 (Common mode conduct): 20V cont. 300V, 1s FCC CFR47 Part 15/EN55022: Class A&B IEC61000-6-2 (Industrial Standards), IEC61850-3(Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)
CE, FCC, UL, ROHS, Mine Safety Certification
MTBF 35 years
Warranty 5 Years
Ordering Information
|
SICOM3000BA
-3GX-6T |
3x1000Base SFP slots,
6x10/100Base-T(X), RJ45 |
|
SICOM3000BA
-6T |
6×10/100Base-T(X), RJ45
| Power supply: 3.3VDC, 24VDC, 48VDC, dual redundant power inputs
SFP Modules SM-GSFP-TX/RJ45: SFP module with 1x10/100/1000M port, RJ45,100m SM-GSFP-LX/LC-550: SFP module with 1x1000M multi Mode Port, LC, 1310nm, 550m SM-GSFP-LX/LC-10: SFP module with 1x1000M single mode port, LC, 1310nm, 10km SM-GSFP-LH/LC-40: SFP module with 1x1000M single mode port, LC, 1310nm, 40km SM-GSFP-ZX/LC-60: SFP module with 1x1000M single mode port, LC, 1550nm, 60km SM-GSFP-ZX/LC-80: SFP module with 1x1000M single mode port, LC, 1550nm, 80km
|