|
Overview SICOM2024 is an entry-level managed industrial Ethernet switch specially designed by KYLAND for industrial applications. It supports up to 24 10/100Base-T(X) and 2 100Base-FX ports, and it also supports Kyvision 3.0 management software. Its high-performance switch engine, solid and closed case, high-efficiency single-rib-shape case for heat dissipation without using fans, overcurrent, overvoltage and EMC protection and excellent EMC protection of RJ45 port make SICOM2024 applicable in harsh and dangerous industrial environments.
Features 1. Up to 2 100Base-FX and 24 10/100Base-T(X) ports 2. Supports standard RSTP/STP (IEEE802.1w/d) redundancy protocol 3. Flexible network topologies: tree, star and chain 4. Supports IGMP Snooping, port trunking, port mirroring, QoS, VLAN, ACL 5. Supports multiple management methods including CLI, TELNET, WEB, SNMP V1/V2 and OPC 6. Supports network topology auto-generation and centralized network management 7. Bandwidth configuration controls port bandwidth properly 8. Broadcast storm control and unicast attack detection 9. IP and MAC address confliction detection 10. EMC industrial level 4, specially designed for harsh electromagnetic interference environment 11. Abundant power supply options, dual redundant power supplies 12. Relay alarm output for the failure of power 13. Unified management software for SICOM series: Kyvision 3.0 14. Operating temperature: -40 to 85°C(-40 to 185°F) 15. Ribbed aluminum case for heat dissipation, fanless design 16. Rack-mounting (19" 1U) installation 17. IP40 protection class
Standard IEEE802.3 IEEE 802.3u IEEE 802.3x IEEE802.1d, IEEE802.1w IEEE802.1p IEEE802.1q Store and forward switching mode
Network Tree, star and chain network topology
Interface 100M Fiber Ports: Max 2 100Base-FX ports, FC/SC/ST 10/100M Copper Ports: Max 24 10/100Base-T(X) ports, RJ45 CONSOLE Interface: RS232, RJ45 Alarm Contact: 3-pin 3.81mm-spacing terminal block, 250VAC/220VDC Max; 2A Max; 60W Max
Performance MAC Address Table Size: 8K Backplane switching capacity: 8.8G
Cable Twisted Pair: 0-100m ( Standard CAT5, CAT5e network cable) Multi Mode Fiber: 1310nm, 0-5km (100Mbps) Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km
|
|
Power Requirements Power input: 24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC (82-185VDC), 110VAC/220VAC/220VDC (85-264VAC/120-370VDC), dual redundant power supplies (optional) Power terminal: 5-pin 5.08mm-spacing plug-in terminal block Power consumption: <15W
Physical Characteristics Casing: Ribbed aluminum case (fanless) Protection class: IP40 Dimensions (WxHxD): 482.6x44x245mm (19x1.73x9.65 in) (Single power supply); 482.6x44x325.25mm (19x1.73x12.81 in) (Dual redundant power supplies)Weight: 2.5kg (single power supply); 3kg (dual redundant power supplies) Installation: 19 inch 1U rack mounting
Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge IEC61000-4-3 (RS): 10V/M (80-1000MHz) IEC61000-4-4 (EFT): power line ±4KV, data line ±2KV IEC61000-4-5 (Surge): power line ±4KV CM/±2KV DM, data line ±2KV IEC61000-4-6 (CS): 3V (10KHZ-150KHZ), 10V (150KHz-80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM IEC61000-4-10 (Damped oscillatory): 30A/m IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s FCC CFR47 Part 15/EN55022: Class A&B IEC61000-6-2 (Industrial Standards), IEC61850-3(Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)
CE, FCC, ROHS, Chinese State Grid Certification
MTBF 35 years
Warranty 5 Years
Ordering Information
|
Model |
Description |
|
SICOM2024-2S(M)-24T |
2x100Base-FX, SM/MM, FC/SC/ST, 24x10/100Base-T(X), RJ45 |
|
SICOM2024-S(M)-24T |
1x100Base-FX, SM/MM, FC/SC/ST, 24x10/100Base-T(X), RJ45 |
|
SICOM2024-24T |
24x10/100Base-T(X), RJ45 |
|
SICOM2024-2S(M)-16T |
2x100Base-FX, SM/MM, FC/SC/ST, 16x10/100Base-T(X), RJ45 |
|
SICOM2024-S(M)-16T |
1x100Base-FX, SM/MM, FC/SC/ST, 16x10/100Base-T(X), RJ45 |
|
SICOM2024-16T |
16x10/100Base-T(X), RJ45 | Power Supply: 24VDC, 48VDC, 110VDC, 110VAC/220VAC/220VDC,dual redundant power supplies (optional)
|