|
Overview KIEN6000 is an 8-port managed DIN-Rail Industrial Ethernet Switch. It comes with DT-Ring technology which is developed by Kyland and used to set up a redundant Ethernet ring network. KIEN6000 also supports dual redundant power inputs. KIEN6000 offers 2 100Base-FX ports and 6 10/100Base-T(X) ports. With a web-based configuration interface, KIEN6000 ensures an easy installation and management of your switches.
Features 1. Supports 2 100Base-FX ports and 6 10/100Base-T(X) RJ45 ports 2. Supports DT-Ring (recovery time <100ms) STP 3. Supports QoS, VLAN, SNMP, MIB V1/V2/V3, IGMP, port mirroring, port trunking, static MAC address binding 4. Complies with EMC industrial level 4 regulated in IEC61850-3 standard 5. Supports CLI, TELNET, WEB management functions 6. Broadcast storm control 7. Abundant power supply options and dual redundant DC power inputs 8. Alarm output for the failure of power supply 9. Ribbed aluminum case for heat dssipation (patent), fanless design 10. Operating temperature: -40 to 85°C (-40 to 185°F) 11. DIN-Rail and wall-mounting 12. IP40 protection class
Standard IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1p IEEE802.1q IEEE802.1d Store and forward switching mode
Network Ring, chain and star network topology
Interface 100M Fiber Ports: 2 x 100Base-FX ports, FC/SC/ST 10/100M Copper Ports: 6 x 10/100Base-T(X) ports, RJ45 Alarm Contact: 2-Pin 3.81mm-spacing terminal block, 250VAC/350VDC Max; 120mA Max LED Indicators: RUN1, RUN2, PWR1, PWR2, LINK/ACT, 10M/100M
Cable Twisted Pair: 0-100m ( Standard CAT5, CAT5e network cable) Multi Mode Fiber: 1310nm, 0-5km Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km |
|
Power Requirements Power input: 12VDC (9-18VDC), 24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC (66-154VDC), 220VDC (220-370VDC),dual redundant power inputs; 110VAC (85-165VAC), 220VAC (165-265VAC), single power input Power terminal: 3-Pin 3.81mm-spacing plug-in terminal block Power consumption: <6W
Physical Characteristics Casing: Ribbed aluminum case (fanless) Protection class: IP40 Installation: DIN-Rail or wall mounting Dimensions (WxHxD): 55.4x139x119.5 mm (2.18x5.47x4.70 in.) Weight: 0.6kg (1.323pound)
Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals IEC61000-4-2 (ESD): ±4KV contact discharge, ±8KV air discharge IEC61000-4-3 (RS): 10V/M (80-1000MHz) IEC61000-4-4 (EFT): power line ±2KV, data line ±1KV IEC61000-4-5 (Surge): power line ±2KV CM/±1KV DM, data line ±1KV IEC61000-4-6 (CS): 3V (10KHZ-150KHZ), 10V (150KHz-80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM IEC61000-4-10 (Damped oscillatory): 30A/m IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s FCC CFR47 Part 15/EN55022: Class A&B IEC61000-6-2 (Industrial Standards), EN50121-4 (Railway Applications)
CE, FCC, RoHS, Chinese State Grid Certification
MTBF 35 years
Warranty 5 years
| Ordering Information
|
Model |
Description |
|
KIEN6000-2S-6T
|
Managed Ethernet switch with 2 100Base-FX ports, single mode, FC/SC/ST connector, 6 10/100Base-T(X) ports, RJ45 connector, DIN-Rail, 12VDC(9-18VDC), 24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC (66-154VDC), 220VDC (220-370VDC),dual redundant power inputs; 110VAC (85-165VAC), 220VAC (165-265VAC), single power input, -40 to 85°C operating temperature |
|
KIEN6000-2M-6T
|
Managed Ethernet switch with 2 100Base-FX ports, multi mode, FC/SC/ST connector, 6 10/100Base-T(X) ports, RJ45 connector, DIN-Rail, 12VDC(9-18VDC), 24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC (66-154VDC), 220VDC (220-370VDC),dual redundant power inputs; 110VAC (85-165VAC), 220VAC (165-265VAC), single power input, -40 to 85°C operating temperature | Power supply: 12VDC, 24VDC, 48VDC, 110VDC, 220VDC dual redundant power inputs; 110VAC, 220VAC, single power input
|