Overview
KIEN5000, an 8-port managed DIN-Rail Industrial Ethernet Switch, comes with DT-Ring technology which is developed by Kyland and used to set up a redundant Ethernet ring network. KIEN5000 also supports dual redundant power inputs. KIEN5000 offers 8 10/100Base-T(X) ports. With a web-based configuration interface, KIEN5000 ensures an easy installation and management of the switches.

Key Features
1. Green Ethernet solution with low power consumption design
2. 8 10/100Base-TX ports
3. Supports DT-Ring protocol and STP
4. EMC performance reaches industrial level 4
5. IP40 protection class
6. CE, FCC certificates

Features & Benefits
1. Redundancy Technology: supports DT-Ring protocol (recovery time<100ms) and STP
2. Multicast Protocol: supports IGMP Snooping and static multicast
3. Network Partition: supports VLAN, PVLAN
4. Service Quality: supports QoS
5. Bandwidth Management: supports port trunking, port speed limit, broadcast storm control
6. Network Management and Monitoring: supports CLI, Telnet, WEB management methods, Kyvision centralized management, SNMPv1/v2/v3, LLDP
7. Network Security: supports MAC address binding with port
8. Device Management: supports FTP upgrade
9. Device Maintenance: supports port mirroring
10. Alarm Output: supports power, port alarms
11. Special Function: supports Link Check and Loop Status Check

Standard
IEEE 802.3i
IEEE 802.3u
IEEE 802.3x
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1d

Protocol
DT-Ring, DT-VLAN, STP;
VLAN, PVLAN;
IGMP Snooping;
FTP, HTTP, LLDP, QoS, SNMPv1/v2/v3, Telnet

Switch Properties
Priority Queues: 4
Number of VLANs: 256
VLAN ID: 1-4094
Number of Multicast Groups: 256
Packet Buffer: 2Mbit
Packet Forwarding Rate: 1.2Mpps
Switching Delay: <5μs

Interface
Fast Ethernet Ports: 8 10/100Base-TX RJ45 ports
Console Port: RS232 (RJ45 connector)
Alarm Contact: 2-pin 3.81mm-spacing plug-in terminal block, 250VAC/350VDC Max, 120mA Max