Keyword Search

Products

Product Search

    Switch Model

    Gigabit port

    100M -FX

    10/100M-TX

KYLAND TECHNOLOGY CO.,LTD.

SICOM6424SM

 

 

Layer 3 24+4G Port Managed Rack Mountable IEC61850 Switch

Datasheet Installation GuideCLI Command Manual Software Operation Manual

Get a Quote


SICOM6424SM

Overview
SICOM6424SM is a layer 3 managed modular industrial Ethernet switch with up to 24 100Base-FX or 10/100Base-T(X) ports, and 4 Gigabit SFP slots or 4 10/100/1000Base-T(X) ports. Offering hardware wire-speed layer 3 switching, they support static and dynamic routing to optimize the network. They provide high performance and reliable solutions for industrial projects with modular design.

Key Features

1. Internal modular design with flexible port combinations
2. 4 Gigabit fiber/RJ45 optional ports, 24 Fast Ethernet fiber/RJ45 optional ports
3. RIP, OSPF, BGP layer 3 routing protocols
4. DT-Ring protocols, MSTP and VRRP
5. Kyvision network management software, network topology auto-generation
6. Exceeds IEC61850-3 & IEEE1613
7. IP40 protection class


Features & Benefits
1. Redundancy Technology: supports DT-Ring protocols (recovery time<50ms), MSTP and VRRP
2. Multicast Protocol: supports IGMP, IGMP Snooping, PIM-SM, PIM-DM, DVMRP
3. Routing Protocol: supports RIPv1/v2, OSPFv2, BGPv4 and static routing protocol
4. Network Partition: supports VLAN, GVRP
5. Service Quality: supports QoS
6. Bandwidth Management: supports port trunking, port speed limit, broadcast storm control
7. Network Management and Monitoring: supports CLI, Telnet, WEB management methods, Kyvision centralized management, SNMPv1/v2, RMON, LLDP, SNTP, DHCP
8. Network Security: supports DT-Psec, ACL
9. Device Management: supports FTP/TFTP upgrade, also supports Syslog upload and download
10. Device Maintenance: supports port mirroring
11. Alarm Output: supports port, power and ring alarms

Standard
IEEE 802.3i
IEEE 802.3u
IEEE 802.3ab
IEEE802.3ac
IEEE 802.3ad
IEEE 802.3z
IEEE 802.3x
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1s

Protocol
DT-Ring, DT-Ring+, DT-VLAN, MSTP, VRRP;
IGMP, IGMP Snooping, PIM-SM, PIM-DM, DVMRP; RIPv1/v2, OSPFv2, BGPv4;
VLAN, GVRP;
Telnet, HTTP, SNMPv1/v2, RMON, LLDP, BootP, SNTP, DHCP server/relay/client;
DT-Psec, ACL;
FTP, TFTP, Syslog;
ARP, QoS, LACP

Switch Properties
Priority Queues: 8
Number of VLANs: 4K
VLAN ID: 1-4094
Number of Multicast Groups: 256
Routing Table: 30K
MAC Table: 16K
Packet Buffer: 512Mbit
Packet Forwarding Rate: 9.5Mpps
Switching Delay: <5μs


Interface
Gigabit Ethernet Ports: 4 1000Base SFP slots or 4 10/100/1000Base-TX RJ45 ports
Fast Ethernet Ports: max 24 100Base-FX, SM/MM ports, FC/SC/ST connector or 24 10/100Base-TX RJ45 ports
Console Port: RS232 (RJ45 connector)
Alarm Contact: 3-pin 3.81mm-spacing plug-in terminal block, 250VAC/220VDC Max, 2A Max, 60W Max

 

LED
LEDs on Front Panel:
Running LED: Run
Alarm LED: Alarm
Power LED: PWR1, PWR2
Interface LED: Link/ACT (Fast Ethernet port), Speed (Fast Ethernet port), DPX (Gigabit Ethernet port), Link (Gigabit Ethernet port)

Transmission Distance
Twisted Pair:
100m (Standard CAT5, CAT5e network cable)
Multi Mode Fiber:
1310nm, 5km (100M)
850nm, 550m (1000M)
Single Mode Fiber:
1310nm, 40km/60km (100M)
1550nm, 60km/80km (100M)
1310nm, 10km/40km (1000M)
1550nm, 60km/80km (1000M)

Power Requirements
Power Input:
24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC (82-185VDC), 220VAC/DC (85-264VAC/120-370VDC)
Power Terminal:
3-pin 9.5mm-spacing plug-in terminal block
Power Consumption: <35W

Overload Protection: Support
Reverse Connection Protection: Support
Redundancy Protection: Support

Physical Characteristics
Housing: Aluminum, fanless
Protection Class: IP40
Dimensions (W×H×D):
482.6×44×420 mm (19×1.73×16.54 in.)
Weight: 5kg (11.023 pound)
Mounting: 19 inch 1U Rack mounting

Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

MTBF
365,000 hrs

Warranty
5 years

Approvals
CE, FCC


Industrial Standard
EMI:
FCC CFR47 Part 15, EN55022/CISPR22, Class A

EMS:
IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m (cont.), 1000A/m (1s-3s)
IEC61000-4-9 (Pulsed magnetic field): 1000A/m
IEC61000-4-10 (Damped oscillation): 100A/m
IEC61000-4-12 (Oscillatory wave): 2.5kV/CM, 1kV/DM
IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)

Machinery:
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)

Industry: IEC61000-6-2
Power: IEC61850-3, IEEE1613
Railway: EN50155, EN50121-4
Traffic Control: NEMA TS-2

     
Please find the ordering information in datasheet.


Beijing ICP:No.09090564