Overview
SICOM6448 are layer 3 managed industrial Ethernet switches with 48 10/100Base-T(X) ports and max 4 1000Base SFP/RJ45 ports or SFP slots for 100Base or 1000Base interface modules. Offering hardware wire-speed  layer 3 switching, they support static and dynamic routing to optimize the network. They provide high performance and reliable solutions for industrial projects and simply are your best choice.

Features
1. Supports up to 48 10/100Base-T(X) ports and 4 Gigabit SFP/RJ45 ports
2. Supports DT-Ring protocols (recovery time<50ms) ans STP/RSTP/MSTP/VRRP
3. Supports QoS, VLAN, SNMP MIB V1/V2/V3, RMON (Group1, 2, 3, 9)
4. Supports static routing protocol and dynamic routing protocols such as RIP v1/v2, OSPF v2 and BGP v4
5. Supports various multicasting routing protocols such as PIM-SM, PIM-DM, DVMRP
6. 36Gbps Backplane bandwidth, hardware-based routing, wire-speed layer-3 switching and forwarding rate is up to 23.1Mpps
7. Powerful ACL, hardware supports data filtering from L2-L7
8. Broadcast storm auto-detection and control, supports IGMP V1/V2/V3 message detection, effectively preventing broadcast overflow
9. Supports full/half duplex flow control with the speed limitation of 64K
10. Supports QinQ to realize double VLAN security
11. Operating temperature: -40 to 85°C (-40 to 185°F)
12. Ribbed aluminum case for heat dissipation (patent), fanless
13. IP40 protection class
14. 19 inch 1U Rack-mounting

Standard
IEEE802.3
IEEE 802.3u
IEEE 802.3x
IEEE802.3z
IEEE802.3ab
IEEE802.3ae
IEEE802.3ad
IEEE802.1p/q
IEEE802.1d
IEEE802.1w
IEEE802.1x
Store and forward switching mode

Interface
SFP Slots: 3 options
1) Max 4 1000Base SFP/RJ45 ports for 1000 Base-SX/LX/LH/ZX, LC or 10/100/1000Base-T(X), RJ45 interface modules
2) 2 100Base SFP slots and 2 1000Base SFP slots
3)4 100Base SFP slots
10/100M Copper Ports: 48 10/100Base-T(X) ports, RJ45
CONSOLE Interface: V.24, RS232, RJ45

Performance
Backplane switching capacity: 36Gbps
Layer 3 switching and forwarding rate: 23.1Mpps  Routing address table: 30K
MAC address table: 16K
802.1Q VLAN: 1 to 4094
Routing Management: static routing, RIP v1/v2, OSPF v2, BEIGRP, BGP v4, IP-based policy routing
Management: CLI, Telnet, SNMP v1/v2, Kyvision

Cable
Twisted Pair: 0-100m ( Standard CAT5, CAT5e network cable)
Multi Mode Fiber: 1310nm, 0-5km (100Mbps); 1310nm 0-2km (1000Mbps)
Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km

Power Requirements
Power input: 24VDC (18-36VDC), 48VDC(36-72VDC), 110VDC(82-185VDC), 110VAC/220VAC/220VDC(85-264VAC/120-370VDC), dual redundant power supplies (optional)
Power terminal: 5-pin 5.08mm-spacing phoenix terminal block
Power consumption: <50W