|
Overview
The KODT series is specially designed for industrial application by KYLAND. It comes as the combination of serial data transmission, Ethernet and optical technology and communication for industrial process control.
Features
1. Supports chain, ring, star and tangent ring network topologies
2. Dual fiber redundant technology, recovery time<20ms
3. Serial ports: RS232/RS422/RS485
4. Serical port supports 15KV ESD protection circuit
5. Alarm output for the failure of fiber ports
6. Dual master stations backup function
7. 8 full duplex data channels, 8x8 data cross-connection
8. Bus control arbitration
9. Level conversion function for data interface
10. Kyvision management software
11. Wall mounting and rack mouting
12. Operating temperature: -40 to 85°C (-40 to 185°F)
13. IP30 protection class
Interface
Fiber ports: 2 fiber ports, FC/SC/ST (KODT2200); 4 fiber ports, FC/SC/ST (KODT2200B)
Serial ports:
Bit Error Rate: �0-10
Asynchronous rate: 0-115.2Kbps (Adaptive)
Electric characteristics: comply with standard RS232/RS422/RS485
Physical interface: DB25-hole
Quantity of serial ports: 6 (KODT2200), 12 (KODT2200B)
Console Interface: RS232, RJ11
Standard
RS232/RS422/RS485 standard
Network
Ring, chain, star and tangent ring network topology
Cable
Serial Cable: 15m for RS232; 1200m for RS422/485
Twisted Pair: 0-100m
Multi Mode Fiber: 1310nm, 0-5km (100Mbps);
Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km
Power Requirements
Power input: 5VDC, 12VDC, 24VDC, 48VDC, 110VDC, 220VAC, single power input
Power terminal: 3-Pin 3.81mm-spacing plug-in terminal block, 3-Pin AC socket
Power consumption: <2W (KODT2200), <3W(KODT2200B)
|
|
Physical Characteristics
Protection class: IP30
Dimensions (WxHxD): 129x28x158mm (5.04x1.10x6.22 in.) (KODT2200)
Dimensions (WxHxD): 482.6x44x139.7mm (19x1.73x5.5 in.) (KODT2200B)
Weight: 1kg (2.205 pound) (KODT2200), 2kg (4.409 pound) (KODT2200B)
Installation: Wall mounting (KODT2200), 19 inch 1U rack mounting (KODT2200B)
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals
IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge
IEC61000-4-3 (RS): 10V/M (80-1000MHz)
IEC61000-4-4 (EFT): power line ±4KV, data line ±2KV
IEC61000-4-5 (Surge): power line ±4KV CM/±2KV DM, data line ±2KV
IEC61000-4-6 (CS): 3V (10KHZ-150KHZ),10V (150KHz-80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s
IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM
IEC61000-4-10 (Damped oscillatory): 30A/m
IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s
FCC CFR47 Part 15/EN55022: Class A&B
IEC61000-6-2 (Industrial Standards), IEC61850-3(Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)
CE, FCC, ROHS, Chinese State Grid Certification
MTBF
35 years
Warranty
5 Years
Ordering Information
KODT2200-2S(M): 2 x fiber ports,SM/MM, FC/SC/ST, 4 x RS232, 2 x RS422/485, wall mounting
KODT2200B-2S(M): 2 x fiber ports, SM/MM, FC/SC/ST, 8 x RS232, 4 x RS422/485, rack mounting
KODT2200B-4S(M): 4 x fiber ports, SM/MM, FC/SC/ST, 8 x RS232, 4 x RS422/485, rack mounting
Power supply: 5VDC, 12VDC, 24VDC, 48VDC, 110VDC, 220VAC/DC, single power input
|
