|
Overview
SICOM6000 is modular layer 3 managed industrial Ethernet switch for Din Rail installation. It offers 4 combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, 24 100M copper/fiber ports or 12 RS232/RS485 serial ports. SICOM6000 also comes with EMC industrial level 4 design and complies with IP40 protection class. Based on Kyvision3.0, CLI, WEB interface, it offers concentrated management. The state-of-the-art OPC software enables the switch’s management embedded in various industrial systems.
Features
1. Modular design, 4 combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, 24 100M copper/fiber ports or 12 RS232/RS485 serial ports
2. Supports DT-Ring protocols (recovery time < 50ms), STP/RSTP/MSTP/VRRP
3. Supports SNTP(Simple Network Time Protocol)
4. Supports IGMP Snooping, port mirroring, QoS, VLAN
5. Supports static routing and dynamic routings such as RIP v1/v2, OSPF v2, BEIGRP, BGP v4
6. Supports multicast routing protocols: PIM-SM, PIM-DM, DVMRP etc.
7. Powerful ACL, hardware supports data filtering from L2-L7
8. Supports DHCP, BOOTP and other address-attaining ways
9. Broadcast storm auto-detection and control, supports IGMP V1/V2 message detection, effectively preventing broadcasting overflow
10. Supports full and half duplex flow control with the speed limitation of the step of 64K
11. Supports QinQ to realize double VLAN security
12. Improves network monitoring ability through RMON (Group 1, 2, 3 and 9)
13. Supports multiple management methods including CLI, TELNET, WEB, SNMP V1/V2/V3 and OPC
14. Flexible RS232/485 access
15. Complies with EMC industrial level 4 regulated in IEC61850-3
16. Unified network management software for SICOM series: Kyvision3.0
17. Relay alarm output for the loss of power
18. Operating temperature: -40 to 85°C (-40 to 185°F)
19. Ribbed aluminum case for heat dissipation (patent), fanless
20. DIN Rail and wall mounting
21. IP40 protection class
Standard
IEEE802.3
IEEE 802.3u
IEEE 802.3x
IEEE802.3z
IEEE802.3ab
IEEE802.3ae
IEEE802.3ad
IEEE802.1p/q
IEEE802.1d
IEEE802.1w
IEEE802.1x
Store and forward switching mode
Network
Ring, chain, star and tangent ring network topology
Interface
Gigabit Ethernet Ports: One Gigabit pluggable module and the module supports 4 combo Gigabit SFP slots or 10/100/1000Base-T(X) ports for 1000Base-SX/LX/LH/ZX, LC or 10/100/1000Base-T(X), RJ45 interface modules |
|
Fast Ethernet Ports: 3 100M pluggable modules and each module supports 8 100M copper/fiber ports
Serial Ports: Each module supports 4 RS232/RS485 serial ports, 20-Pin 3.81mm-spacing terminal block
CONSOLE Interface: RS232, RJ45
Alarm Contact: 3-Pin 3.81mm-spacing plug-in terminal block, 250VAC/220VDC Max; 2A Max; 60W Max
LED Indicator: RUN, ALARM, PWR1, PWR2, L1-L4; LINK, ACT (G1-G4, 1/1-8, 2/1-8, 3/1-8); TX1-TX4, RX1-RX4 (RS232/485)
Performance
Backplane switching capacity: 36G
Layer 3 switching and forwarding rate: 19.6Mpps
Routing address table size: 30K
MAC Address table size: 16K
Cable
Twisted Pair: 0-100m ( Standard CAT5, CAT5e network cable)
Multi Mode Fiber: 1310nm, 0-5km (100Mbps); 1310nm 0-2km (1000Mbps)
Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km
Power Requirements
Power input: 12VDC (9-18VDC), 24VDC (18-36VDC), 48VDC (36-72VDC) dual redundant power inputs
Power terminal: 5-Pin 5.08mm-spacing plug-in terminal block
Power consumption: <35W
Physical Characteristics
Casing: Ribbed aluminum case (fanless)
Protection class: IP40
Installation: DIN-Rail or wall mounting
Dimensions (WxHxD): 320x165.5x236mm (12.60x6.52x9.29 in.)
Weight: 7kg (15.432 pound)
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals
IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge
IEC61000-4-3 (RS): 10V/M (80-1000MHz)
IEC61000-4-4 (EFT): power line ±4KV, data line ±2KV
IEC61000-4-5 (Surge): power line ±4KV CM/±2KV DM, data line ±2KV
IEC61000-4-6 (CS): 3V (10KHZ-150KHZ),10V (150KHz-80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s
IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM
IEC61000-4-10 (Damped oscillatory): 30A/m
IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s
FCC CFR47 Part 15/EN55022: Class A&B
IEC61000-6-2 (Industrial Standards), IEC61850-3(Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)
CE, FCC, ROHS
MTBF
35 years
Warranty
5 years |
