|
Overview SICOM3048 is a modular network-managed industrial Ethernet switch specially designed by KYLAND for industrial applications. Its high-performance switch engine, solid and closed case, high-efficiency single-rib- shape case for heat dissipation without using fans, over-current, over-voltage and EMC protection at power input side, and excellent EMC protection of RJ45 port allow SICOM3048 to work in harsh and dangerous industrial environments. The redundant function of optical fiber network, independent entire network management channel, redundant power input function, and powerful entire network real-time management system provide multiplex guarantee for reliable operation of the system.
Features 1. Modular design, up to 24 100Base-FX ports and 4 Gigabit fiber ports 2. Supports DT-Ring protocols (recovery time<50ms) and RSTP/STP (IEEE802.1w/d) 3. Flexible network topologies: ring, chain, star and tangent ring 4. Advanced ring topology protocol avoiding broadcast storm 5. Supports IGMP Snooping, port trunking, port mirroring, QoS, VLAN, ACL 6. Supports multiple management functions including CLI, TELNET, WEB, SNMP V1/V2 and OPC 7. Supports network topology auto-generation and centralized network management 8. Safe MAC and port binding function, static FDB supported 9. Bandwidth configuration controls port bandwidth properly 10. Improves network monitoring ability through RMON(group 1, 2, 3 and 9) 11. Broadcast storm control 12. EMC industrial level 4, specially designed for harsh electromagnetic interference environment 13. Various power supply options, dual redundant power inputs (optional) 14. Relay alarm output for the failure of power 15. Unified management software for SICOM series: Kyvision 3.0. 16. Operating temperature: -40 to 85°C (-40 to 185°F) 17. Ribbed aluminum case for heat dissipation, fanless design 18. 19 inch 2 U Rack-mounting 19. IP40 protection class
Standard IEEE802.3 IEEE 802.3u IEEE 802.3x IEEE802.3z IEEE802.3ab IEEE802.1d IEEE802.1w IEEE802.1p IEEE802.1q Store and forward switching mode
Network Ring, chain, star and tangent ring network topology
Interface Gigabit Ethernet Ports: 4 1000Base SFP slots for 1000Base-SX/LX/LH/ZX, LC or 10/100/1000Base-T(X), RJ45 interface modules 10/100M Copper Ports: Max 48 10/100Base-T(X) ports, RJ45 100M Fiber Ports: Max 24 100Base-FX ports (FC/SC/ST) CONSOLE Interface: RS232, RJ45
Performance MAC Address Table Size: 8K Backplane switching capacity: 17.6G
Cable Twisted Pair: 0-100m ( Standard CAT5, CAT5e network cable) Multi Mode Fiber: 1310nm, 0-5km (100Mbps); 1310nm 0-2km (1000Mbps) Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km
Power Requirements Power input: 24VDC (18-36VDC), 48VDC (36-72VDC), 110VDC (82-185VDC), 110VAC/220VAC/220VDC (85-264VAC/120-370VDC), dual redundant power inputs Power terminal: 3-Pin 3.81mm-spacing plug-in terminal block for 24VDC/48VDC; 3-Pin 9.5mm-spacing plug-in terminal block for other power supplies, 3-pin AC power socket Power consumption: <45W
|
|
Physical Characteristics Casing: Ribbed aluminum case (fanless) Protection class: IP40 Dimensions (WxHxD): 482.6x88x245mm (19x3.46x9.65 in.) Weight: 6kg (13.228 pounds) Installation: 19 inch 2U rack mounting
Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 0 to 95% (non-condensing)
Approvals IEC61000-4-2 (ESD): ±8KV contact discharge, ±15KV air discharge IEC61000-4-3 (RS): 10V/M (80-1000MHz) IEC61000-4-4 (EFT): power line ±4KV, data line ±2KV IEC61000-4-5 (Surge): power line ±4KV CM/±2KV DM, data line± 2KV IEC61000-4-6 (CS): 3V (10KHZ-150KHZ),10V (150KHz-80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s IEC61000-4-12/18 (Damped oscillatory wave): 2.5KV CM, 1KV DM IEC61000-4-10 (Damped oscillatory): 30A/m IEC61000-4-16 (Common mode conduct): 30V cont. 300V, 1s FCC CFR47 Part 15/EN55022: Class A&B IEC61000-6-2 (Industrial Standards), IEC61850-3(Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)
CE, FCC, ROHS, Chinese State Grid Certification
MTBF 35 years
Warranty 5 Years
Ordering Information
|
SICOM3048-4GX host |
4x1000Base SFP slots, 24x10/100Base-T(X) ports, RJ45, 4 expansion slots for 100Base modules (see SM3 series) |
|
SM3-6S(M) |
Interface module with 6x100Base-FX ports, SM/MM, FC/SC/ST |
|
SM3-5S(M)-T |
Interface module with 5x100Base-FX ports, SM/MM, FC/SC/ST and 1x10/100Base-T(X) port, RJ45 |
|
SM3-4S(M)-2T |
Interface module wiith 4x100Base-FX ports, SM/MM, FC/SC/ST and 2x10/100Base-T(X) ports, RJ45 |
|
SM3-3S(M)-3T |
Interface module wiith 3x100Base-FX ports, SM/MM, FC/SC/ST and 3x10/100Base-T(X) ports, RJ45 |
|
SM3-2S(M)-4T |
Interface module wiith 2x100Base-FX ports, SM/MM, FC/SC/ST and 4x10/100Base-T(X) ports, RJ45 |
|
SM3-S(M)-5T |
Interface module wiith 1x100Base-FX port, SM/MM, FC/SC/ST and 5x10/100Base-T(X) ports, RJ45 |
|
SM3-6T |
Interface module with 6x10/100Base-T(X) ports, RJ45 | Power supply: 24VDC, 48VDC, 110VDC, 110VAC/220VAC/220VDC, dual redundant power inputs
SFP Modules SM-GSFP-TX/RJ45: SFP module with 1x10/100/1000M port, RJ45,100m SM-GSFP-LX/LC-550: SFP module with 1x1000M multimode port, LC, 1310nm, 550m SM-GSFP-LX/LC-10: SFP module with 1x1000M single mode port, LC, 1310nm, 10km SM-GSFP-LH/LC-40: SFP module with 1x1000M single mode port, LC, 1310nm, 40km SM-GSFP-ZX/LC-60: SFP module with 1x1000M single mode port, LC, 1550nm, 60km SM-GSFP-ZX/LC-80: SFP module with 1x1000M single mode port, LC, 1550nm, 80km
|