Overview
SICOM3024 is a high-performance network-managed industrial Ethernet switch specially designed by KYLAND for industrial applications. Its high-performance switch engine, solid and closed case, high-efficiency single-rib- shape case for heat dissipation without using fans, overcurrent, overvoltage and EMC protection at power input side, and excellent EMC protection of RJ45 port make SICOM3024 applicable in harsh and dangerous industrial environments. The redundant function of optical fiber network, independent entire network management channel, dual redundant power supplies function, and powerful entire network real-time management system provide multiplex guarantee for reliable operation of the system.

Features
1. Up to 8 100Base-FX ports and 2 Gigabit fiber ports
2. Supports DT-Ring protocols (recovery time<50ms), RSTP/STP (IEEE802.1w/d)
3. Flexible network topologies: ring, chain, star, and tangent ring
4. Advanced ring topology protocol avoiding broadcast storm
5. Supports IGMP Snooping, port trunking, port mirroring, QoS, VLAN, ACL
6. Supports multiple management functions including CLI, TELNET, WEB, SNMP V1/V2 and OPC
7. Supports network topology auto-generation and centralized network management
8. Safe MAC and port binding function, static FDB supported
9. Bandwidth configuration controls port bandwidth properly
10. Improves network monitoring ability through RMON(group 1, 2, 3 and 9)
11. Broadcast storm control
12. EMC industrial level 4, specially designed for harsh electromagnetic interference environment
13. Abundant power supply options, dual redundant power supplies
14. Relay alarm output for the failure of power
15. Unified management software for SICOM series: Kyvision 3.0.
16. Operating temperature: -40 to 85°C (-40 to 185°F)
17. Ribbed aluminum case for heat dissipation, fanless design
18. Rack-mounting (19 inch 1U)
19. IP40 protection class

Standard
IEEE802.3
IEEE 802.3u
IEEE 802.3x
IEEE802.3z
IEEE802.3ab
IEEE802.1d
IEEE802.1w
IEEE802.1p
IEEE802.1q
Store and forward switching mode

Network
Ring, chain, star and tangent ring network topology.

Interface
Gigabit Ethernet Ports: 2 1000Base SFP slots for 1000Base-SX/LX/LH/ZX, LC or 10/100/1000Base-TX, RJ45 interface modules
100M Fiber Port: Max 8 100Base-FX ports, FC/SC/ST
10/100M Copper Ports: Max 24 10/100Base-T(X) ports, RJ45, 8 of which can be selected as fiber ports.
Console Interface: RS232, RJ45
Alarm Contact: 3-pin 3.81mm-spacing terminal block, 250VAC/220VDC Max; 2A Max; 60W Max

Performance
MAC Address Table Size: 8K
Backplane switching capacity: 8.8G

Cable
Twisted Pair: 0-100m ( Standard CAT5, CAT5e network cable)
Multi Mode Fiber: 1310nm, 0-5km (100Mbps); 1310nm 0-2km (1000Mbps)
Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km

Power Requirements
Power input: 12VDC (9-18VDC), 24VDC (18-36VDC),
48VDC (36-72VDC), 110VDC (82-185VDC),
110VAC/220VAC/220VDC (85-264VAC/120-370VDC), dual redundant power supplies (optional)
Power terminal: 5-pin 5.08mm-spacing plug-in terminal block
Power consumption: <20W